Attentive to the needs of healthcare professionals and patients, we have designed a medical-surgical bed that raises the standards of care enormously. The VLT-932 provides much more safety and comfort for the patient, and offers valuable resources for caregivers on a daily basis.
Vallitech beds are designed and manufactured to ensure that day-to-day use in the hospital does not cause premature and/or permanent wear to the equipment.
They are produced with a high quality carbon steel structure, coated with electrostatic paint and designed with the help of finite element engineering software, which simulates the stresses and strains of severe use within a hospital.
With these results, it is possible to predict and reinforce the main points of demand, giving the product a much longer service life.
They are tested exhaustively in the laboratory and at the factory to guarantee an extended service life of 10 years, without noise, vibrations or deformations.
The VLT-932 bed was developed to fit the dimensions of hospitals in general. It has a short length and width, which makes it easier to transport and reduces the space needed for its use. These characteristics, combined with its low height, make it easier for patients to use and for nurses to handle. Grids with high dimensions provide greater safety, reducing the risk of falls and allowing the use of mattresses with greater heights, within the normative safety standards. The grid movement mechanism requires less space to operate, while still reducing the lateral spaces required. It has an abdominal compensation system in the back (double pivoting axis), which reduces abdominal pressure when moving the dorsal section.
LAYOUT
The bed has 4 sections and can be made from painted sheet steel or blown high-density polyethylene (removable for easy cleaning). It has vents for ventilating the mattress, specific points for restraining the patient along its entire length and hooks for collection bags.
HEADBOARD AND FOOTBOARD
Removable, blown in high-density polyethylene.
SIDE GUARD RAILS
Articulated, blown in high-density polyethylene, with unlocking and articulation mechanisms towards the side of the bed, moving only 6.5 cm to lower the rail, using a reduced lateral space. Its height of 40 cm from the bed provides greater safety for the user. It has built-in indicators for the angle of inclination of the back and trendelemburg.
MOVEMENTS
Powered by electric motors, controlled by membrane keypads on the side rails (internal and external). The control on the back is optional. Through the internal membranes, only the movements of the back, legs and night light are accessible to the patient. On the external nursing side, it is possible to control all the bed's movements, as well as programmed positions such as armchair, self-contouring, trendelemburg, reverse trendelemburg, as well as individual blocking of motor functions.
WHEELS
Central brake pedal system with directional wheel located near the foot of the bed, with optional individual brakes on the castors.
Total length
2.24 m (± 0.01 m)
Total length with extender (optional)
2.55 m (±0.01 m)
Width with rails up
1.01 m (± 0.01 m)
Height variation
0.37 m - 0.75 m (± 0.01 m)
Mattress platform
0.86 m × 2.00 m (± 0.01 m)
Degree of maximum back
70º
Maximum degree of leg
30º
Trendelenburg
15.5º ± 2º
Reverse Trendelenburg
- 15.5º ± 2º
Height of the rails from the mattress platform
40 cm
Maximum mattress height indicated
16 cm
Maximum safety load
250 kg
Abdominal compensation when lifting the back section
(double pivoting axis)
12 cm ± 2 cm
Grille lateral clearance when retracting (lowering)
6,5 cm
Castor dimensions
100, 125 and 150 mm
Brake system
Central pedal (standard)
or individual on casters (optional)
Round 5
Optional
Mechanical and electronic CPR
Yes
Radiotransparent back (x-ray)
Optional
Bed extender (31 cm)
Optional
Oxygen holder
Optional
Removable headboard and footboard
Yes
Heart position button
Standard
Rotating bumpers on the 4 corners of the bed
Standard
Socket for IV support on the 4 corners of the bed
Standard
Night light
Standard
Back degree indicator
Standard
Trendelemburg grade indicator
and Reverse Trendelemburg
Standard
Membrane keypads on the grilles
Internal and external (standard)
Headrest (optional)
Wired control (optional)
Collection bag holder
Standard
Bed
Painted sheet metal (standard)
ABS (optional)
Location for patient restriction
Standard
Self-contouring
Standard
IV stand
Optional
Keyboard on the bed
Optional
Patient exit alarms
Optional
Seated Patient Alarm
Optional
Skin pressure alarm
Optional
Fall risk alarm
Optional
Brake activated alarm
Optional
Back alarm 30º
Optional
Nurse call
Optional
Minimum height indicator
Optional
Remote monitoring
Optional
Single foam mattress
Optional
Double density memory foam mattress
Optional
Food
100 - 240 VAC, 50 - 60 Hz
Battery backup
Yes
Protection against water
IPX4
Regulatory standards
IEC 60601-1
IEC 6.0601-2-52
IEC 60601-1-2
Integrated Digital Scale
Optional
CONNECTIVITY (OPTIONAL)
The connectivity system has been developed for remote monitoring of the bed directly at the nursing station.
With the help of sensors, protocols were pre-set directly on the bed processor, allowing for better control in reducing patient falls, care times, nursing calls, patient positioning in bed, degree of back inclination due to lung problems and decubitus change intervals in order to provide greater comfort and avoid complications due to prolonged immobility, such as: decompressing areas of bony prominences, preventing lung complications and pressure ulcers and stimulating circulation.
When the protocols are activated, the bed monitors their functions and if any changes are detected, an audible alarm in the bed and a pop-up on the monitoring screen in the nurse will be initiated.
Points monitored: rails, brakes, bed height, presence of patient in bed, patient lying or sitting, weight, back inclination and decubitus change time.
GRAPHICAL INTERFACE
An LCM (liquid crystal module) display built into the grid, with special graphic controllers, in color and with touchscreen interaction, supports the graphic interface. Operation is intuitive, making it easy for caregivers and the Clinical Engineering team to visualize the bed's status.
It offers visualizations of patient information, such as back angle, trendelenburg and reverse, and activation of medical care protocols. Any changes detected will trigger an audible alarm in the bed and a pop-up will be shown on the display indicating which protocol has been activated.
On beds with integrated scales, a history of the patient's stored weights, BMI (body mass index) calculation, zeroing and tare of the scale will be shown on the display.
The maintenance status of the bed can be monitored via the Clinical Engineering screens, which provide information such as battery voltage and charge level, limits, currents, overloads, usage time, the ageing factor of each of the motors and the status of each of the bed's sensors.
PATIENT SAFETY
COMPLIANCE WITH IEC 60601-2-52
High-density polyethylene hinged side protection rails, certified to the new ABNT NBR IEC 60601-2-52:2013 standard, which standardizes patient safety measures such as: minimum rail height of 220 mm (above the mattress) covering more than 50% of the bed, spacing of less than 60 mm between the side rails and between the headboard/sideboard and the side rails, openings built into the rails/headboard/sideboard smaller than 120 mm and other spacing to avoid trapping the neck, chest and head. It has a mechanism for unlocking and moving the bed sideways, allowing it to be lowered into the bed, facilitating patient transfer and avoiding problems with probed patients.
ABDOMINAL COMPENSATION SYSTEM
Abdominal compensation system designed to reduce pressure on the patient's abdomen, where a 110 mm offset in the back is made during movement.
FEATURES
LAYOUT
CLEANING
Blown high-density polyethylene bed. High resistance and durability, combined with ease of cleaning due to its removability.
Easy and immediate access for maintenance, cleaning and disinfection tasks: detachable bed.
SPLIT GRILLES
CONTROLS
Lateral movement with cushioning. Amplitude: 6.5 cm.
MEMBRANE WITH ALARMS: Only available for systems with connectivity.
OPTIONAL
Grid and Supervisor Control (Optional): allows you to control grid locks and bed functions in the supervisor position.
It is a medical-surgical bed designed to be easy to use, without sacrificing advanced features that make day-to-day care of acute patients easier. With features that simplify the routine for nurses and caregivers, it guarantees maximum patient safety, while facilitating and encouraging mobility.
Hospital bed with fowler and trendelemburg movements. The fowler movements are controlled by an electric motor with a wired remote control. The trendelemburg movement is powered by a system of gas shock absorbers, allowing the bed to be tilted quickly and completely.
Electric fowler's bed made from steel tubes and covered in high-strength thermoplastic material. The bed is hinged, made of square steel tubing and coated with high-strength thermoplastic material.
Vallitech uses its own technical cookies and third-party cookies to analyze browsing and traffic generated for statistical purposes. By clicking on "Accept all", you agree to the use of ALL cookies. However, you can visit "Cookie settings" to provide controlled consent.
This website uses cookies to improve your experience while browsing the site. Of these, cookies that are categorized as necessary are stored in your browser, as they are essential for the functioning of the basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will only be stored in your browser with your consent. You also have the option of opting out of these cookies. However, disabling some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. These cookies guarantee basic functionalities and security features of the website, anonymously.
Cookie
Duration
Description
cookielawinfo-checkbox-analytics
11 months
This cookie is set by the GDPR Cookie Consent plugin. The cookie is used to store user consent for cookies in the "Analytics" category.
cookielawinfo-checkbox-functional
11 months
The cookie is set by the GDPR cookie consent to record the user's consent to cookies in the "Functional" category.
cookielawinfo-checkbox-necessary
11 months
This cookie is set by the GDPR Cookie Consent plugin. Cookies are used to store user consent for cookies in the "Necessary" category.
cookielawinfo-checkbox-performance
11 months
This cookie is set by the GDPR Cookie Consent plugin. The cookie is used to store the user's consent for cookies in the "Performance" category.
viewed_cookie_policy
11 months
The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not the user has consented to the use of cookies. It does not store any personal data.
Functional cookies help to perform certain functionalities, such as sharing website content on social media platforms, collecting feedback and other third-party resources.
Performance cookies are used to understand and analyze the main performance indexes of the website, which helps to provide a better user experience for visitors.
Analytical cookies are used to understand how visitors interact with the site. These cookies help provide information on the metrics of the number of visitors, bounce rate, traffic source, etc.